Pipes, Fittings, Flanges, Plates Supplier to Marshall Islands

Pipes, Fittings, Flanges, Plates Supplier to Marshall Islands

FERROBEND is an eminent supplier of Pipes, Tubes, Fittings, Flanges, Valves, Fasteners, Expansion Joints, Plates, Sheets, Wires, Bars, Rods and other piping components to Marshall Islands.
We manufacture and stock standard and custom built Fittings, Flanges, Valves and Fasteners over wide range of materials, sizes, across many international standards and specifications. We supply these products to various trading houses, EPC and end users in Marshall Islands.


Pipes Supplier to Marshall Islands

Types Seamless / Welded (ERW/EFW/LSAW/HSAW) Forged and Bored
Sizes 1/8” up to 24” (Seamless) Up to 72” in Welded
Ends Bevelled / Plain / Threaded
Length Up to 12 Meters
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625,
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Pipe Fittings to Marshall Islands

Types Butt Welded, Socket Weld, Threaded
Sizes 1/8” to 4” in Socket Weld & Threaded, 1/8” to 24” Seamless Butt Welded, up to 72” in ERW Butt Welded
Ends Bevelled, Plain, Socket Weld & Threaded
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Flanges Supplier to Marshall Islands

Types Slip-On, Welding Neck, Socket Weld, Threaded, Blind, Lap Joint, Long Welding Neck, Spectacle, Nozzle and many more
Sizes 1/2” up to 60”
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Valves Supplier to Marshall Islands

Types Butterfly & Ball Valves
Sizes 1/2” up to 72”
Ends Flanged, Socket Weld, Threaded, Butt Weld
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Strainers Supplier to Marshall Islands

Types Y Type, T Type & Duplex Basket Strainers
Sizes 1/2” up to 72”
Ends Flanged
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Expansion Joints Supplier to Marshall Islands

Types Single Arch & Double Arch Rubber Expansion
Sizes 1/2” up to 72”
Ends Flanged & Threaded
Material Carbon Steel, Galvanized & Stainless Steel
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Forgings Supplier to Marshall Islands

Forged Products Forged Fittings, Forged Flanges, Forged Pipes, Forged Bars, Forged Blocks, Forged Valves, Forged Strainers, and custom Forged Parts & Components
Sizes 10mm up to 3000mm in Diameter
Weight 5gm to 5000 Kilograms per Piece
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Castings Supplier to Marshall Islands

Forged Products Forged Fittings, Forged Flanges, Forged Pipes, Forged Bars, Forged Blocks, Forged Valves, Forged Strainers, and custom Forged Parts & Components
Sizes 10mm up to 3000mm in Diameter
Weight 5gm to 5000 Kilograms per Piece
Material Carbon, Alloy, Stainless Steel, Titanium, Nickel 200, Monel 400, Hastelloy C276, Inconel 601, Inconel 625
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Fasteners Supplier to Marshall Islands

Type Bolts, Nuts, Washers, Screws, Threaded Rods, Pins, Spring, Custom Bolts and Nuts, Machined Components.
Sizes #2 to 8 Inch and M1 to M152
Thread Metric Coarse, Fine, Extra fine, 8UN, UNC, UNF, UNEF
Length Up to 6 Meters (threaded bars and rods)
Coating Auto Black, Zinc, Cadmium, Fluorocarbon Polymer like PTFE/TEFLON, Hot Dip Galvanizing, Dacromet, Geomet, Nickel Zinc, Chrome, Silver, Gold, Copper, etc.
Dimension Standards ASME/ISO/SAE/BS/EN/ISO/GOST
Material Specifications ASTM/SAE/ISO/BS/EN etc

Bars Supplier to Marshall Islands

Type Round, Square, Hexagon & Flat Bars
Sizes 1mm to 1000mm
Length Upto 12 Meters
Surface As Rolled, Peeled, Polished, Grounded
Material Specifications ASTM/SAE/ISO/BS/EN etc

Plates Supplier to Marshall Islands

Condition Hot Rolled & Cold Rolled
Thickness 1mm to 400mm
Width 100mm to 3000mm
Length 100mm to 12000mm or Coil Form
Surface HR, CR, Shot Blasted, Grit Blasted, No 4, No 8
Treatment Solution Annealed, Q&T, Age Hardened, etc
Material Specifications ASTM/SAE/ISO/BS/EN etc