ASTM B730

This specification covers nickel (UNS N02200), lowcarbon nickel (UNS N02201), and nickel copper alloy (UNS N04400) in the form of welded and annealed or welded and stress-relieved tube intended for general corrosive service and for mechanical applications. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Chemical Properties

UNS Designation Nickel, min Copper Iron, max Manganese, max Carbon, max Silicon, max Sulfur, max
N02200 99.0 0.25 max 0.40 0.35 0.15 0.35 0.01
N02201 99.0 0.25 max 0.40 0.35 0.02 0.35 0.01
N04400 63.0 28.0–34.0 2.6 2.0 0.3 0.5 0.024

Note:

Mechanical Properties

Condition and Size Tensile Strength,
min, psi (MPa)
Yield Strength (0.2 % offset),
min, psi (MPa)
Elongation in 2 in.
or 50 mm (or 4D),
min, %
Nickel Low-
Carbon
Nickel
UNS
N04400
Nickel Low-
Carbon
Nickel
UNS
N04400
Nickel Low-
Carbon
Nickel
UNS
N04400
Annealed: 5 in. (127 mm) and under outside 55 000 (380) 50 000 (345) 70 000 (480) 15 000 (105) 12 000 (80) 28 000 (195) 35 35 35
diameter: Over 5 in. (127 mm) in outside diameter 55 000 (380) 50 000 (345) 70 000 (480) 12 000 (80) 10 000 (70) 25 000 (170) 40 40 35
Stress-relieved: All sizes 65 000 (450) 60 000 (415) 85 000 (585) 40 000 (275) 30 000 (205) 55 000 (380) 15 15 15

Products