ASTM B491 / B491M Alloy 1235
Chemical Properties
| Silicon | Iron | Copper | Manganese |
Magnesium |
Zinc |
Vanadium |
Titanium |
Other ElementsD |
Aluminum | |
|---|---|---|---|---|---|---|---|---|---|---|
| Each | TotalE | |||||||||
| 0.65 Si + Fe | 0.05 | 0.05 | 0.05 | 0.10 | 0.05 | 0.06 | 0.03 | ... | 99.35F | |
D Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered nonconforming.
E Other Elements—Total shall be the sum of unspecified metallic elements 0.010 % or more, rounded to the second decimal before determining the sum.
F The aluminum content shall be calculated by subtracting from 100.00 % the sum of all metallic elements present in amounts of 0.010 % or more each, rounded to the second decimal before determining the sum.
Mechanical Properties
| Temper |
Specified Wall Thickness, in. |
Tensile Strength, ksi |
Yield Strength (0.2 % Offset) min, ksi |
Elongation in 2 in. min, % | |
|---|---|---|---|---|---|
| min | max | ||||
| H111 | 0.032–0.050 | 11.0 | ... | 7.5 | 30 |
