ASTM B353
This specification covers seamless and welded wrought zirconium and zirconium-alloy tubes for nuclear application.Nuclear fuel cladding is covered in Specification B 811.
Five grades of reactor grade zirconium and zirconium alloys suitable for nuclear application are described.The present UNS numbers designated for the five grades. Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. SI values cannot be mixed with inch-pound values.
Chemical Properties
UNS Designation |
Tin |
Iron |
Chromium |
Nickel |
Niobium (columbium) |
Oxygen |
Iron + chromium + nickel |
Iron + chromium |
UNS R60001 |
... |
... |
... |
... |
... |
A |
... |
... |
UNS R60802 |
1.20–1.70 |
0.07–0.20 |
0.05–0.15 |
0.03–0.08 |
... |
A |
0.18–0.38 |
... |
UNS R60804 |
1.20–1.70 |
0.18–0.24 |
0.07–0.13 |
... |
... |
A |
... |
0.28–0.37 |
UNS R60901 |
... |
... |
... |
... |
2.40–2.80 |
0.09–0.15 |
... |
... |
Note:
A When so specified in the purchase order, oxygen shall be determined and reported. Maximum, minimum, or both, permissible values should be specified in the purchase order.
Mechanical Properties
Material Condition |
Test TemperatureC,F |
Minimum Ultimate Tensile Strength psi (MPa) |
Minimum 0.2 % Yield Strength psi (MPa) |
Minimum Elongation, % |
°F |
(°C) |
R60001
|
RT
|
RT
|
42 000 (290) |
20 000 (140) |
25 |
Recrystallized |
572 |
(300) |
B |
B |
B |
R60802, R60804
|
RT
|
RT
|
60 000 (415) |
35 000 (240) |
20 |
Recrystallized |
572 |
(300) |
B |
B |
B |
R60802, R60804
|
RT
|
(RT)
|
B |
B |
B |
Cold-worked and Stress-relieved |
572 |
(300) |
B |
B |
B |
R60901, R60904
|
RT
|
(RT)
|
65 000 (450) |
45 000 (310) |
20 |
Recrystallized |
572 |
(300) |
B |
B |
B |
R60901, R60904
|
RT
|
(RT)
|
103 000 (710) |
70 000 (485) |
12 |
Cold-worked and Stress-relieved |
572 |
(300) |
69 500 (480) |
48 000 (330) |
12 |
Note:
B To be agreed upon between the manufacturer and the purchaser.
Products