ASTM B234 Alloy 5454

Chemical Properties

Silicon	Iron	Copper	Manganese	Magnesium	Chromium	Zinc	Titanium	Other ElementsD		Aluminum
								Each	TotalE
0.25	0.40	0.10	0.50–1.0	2.4–3.0	0.05–0.20	0.25	0.20	0.05	0.15	remainder

Note D: Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in this specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered nonconforming. Note E: Other Elements—Total shall be the sum of unspecified metallic elements 0.010 % or more, rounded to the second decimal before determining the sum.

Mechanical Properties

Temper	Wall Thickness, in.	Tensile Strength, min, ksi	Yield Strength, (0.2 % offset), min, ksi	Elongation in 2 in., or 4 x Dia,C min, %
				Full-Section Specimen	Cut-Out Specimen
H32 H34	0.010–0.050 0.051–0.200 0.010–0.050 0.051–0.200	36.0 36.0 39.0 39.0	26.0 26.0 29.0 29.0	... ... ... ...	5 8 4 6

Note C: Elongation of full-section and cut-out sheet-type specimens is measured in 2 in., of cut-out round specimens, in 4 3 specimen diameter.

Products