Note C: Carbon plus nitrogen = 0.30 max.Note F: Cb/(C + N) = 12 min.
Mechanical Properties
Tensile Strength, min, ksi [MPa]
Yield Strength, min, ksi [MPa]
Elongation,A,B in 2 in. or 50 mm, min, %
Note A: For tubing smaller than 1/2 in. [12.7 mm] in outside
diameter, the elongation values given for strip specimens in table
shall apply. Mechanical property requirements do not apply to tubing
smaller than 1/8 in. [3.2 mm] in outside diameter or with
walls thinner than 0.015 in. [0.4 mm]Note B: For longitudinal strip tests a deduction of 0.90 % for TP446–1 and
S 44735 and 1.00 % for all other grades shall be made from the basic
minimum elongation for each 1/32 in. [0.8 mm] decrease in
wall thickness below 5/16 in. [8 mm]. The following table
gives the computed minimum values