ASTM A213 / A213M UNS S30400

Chemical Properties

Carbon	Manganese	Phosphorus	Sulfur	Silicon	Chromium	Nickel

Note D: For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040% is necessary in Grades TP304L, TP304LN, TP316L, and TP316LN.

Mechanical Properties

Tensile Strength, min, ksi [MPa]	Yield Strength, min, ksi [MPa]	Elongation in 2 in. or 50 mm, min, %B,C	HardnessA
			Brinell	Rockwell

Note A: Max, unless a range or a minimum is specified.

Products