ASTM A179 / A179M

This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.This specification covers tubes 1⁄8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

Chemical Properties

Carbon, % Manganese, % Phosphorus, max, % Sulfur, max, %
0.06–0.18 0.27–0.63 0.035 0.035

Mechanical Properties

Tensile strength, min,
ksi [MPa]
Yield strength, min,
ksi [MPa]
Elongation in 2 in. or 50 mm,
min, %
47 [325] 26 [180] 35

Products