ASTM B599

This specification covers nickel- iron- chromiummolydenum- columbium stabilized alloy (UNS N08700)* plate, sheet, and strip in the solution-annealed condition.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Chemical Properties

Nickel Iron Chromium Molybdenum Columbium Carbon Silicon Manganese Phosphorus Sulfur Copper
24.0–26.0 remainderA 19.0-23.0 4.3-5.0 8 * carbon to 0.40 0.04 max 1.00 max 2.00 max 0.040 max 0.030 max 0.50 max
Note A: Determined arithmetically by difference.

Mechanical Properties

Form Tensile Strength, min,
ksi (MPa)
Yield Strength (0.2 % offset), min,
ksi (MPa)
Elongation in 2 in. (50.8 mm) or 4D min
%
Rockwell Hardness (or equivalent)A
Sheet 80 (550) 35 (240) 30 75-90HRB
Strip 80 (550) 35 (240) 30 75-90HRB
Plate 80 (550) 35 (240) 30 75-90HRB
Note A: Hardness values are shown for information only and shall not constitute a basis for acceptance or rejection as long as the other mechanical properties are met.

Products