ASTM B551 /B551M

This specification covers five grades of zirconium strip, sheet, and plate.The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Chemical Properties

Alloy Zirconium + hafnium, min Hafnium, max Iron + chromium Tin Hydrogen, max Nitrogen, max Carbon, max Niobium Oxygen, max
UNS R60700 99.2 4.5 0.2 max - 0.005 0.025 0.05 - 0.10
UNS R60702 99.2 4.5 0.2 max - 0.005 0.025 0.05 - 0.16
UNS R60704 97.5 4.5 0.2-0.4 1.0-2.0 0.005 0.025 0.05 - 0.18
UNS R60705 95.5 4.5 0.2 max - 0.005 0.025 0.05 2.0-3.0 0.18
UNS R60706 95.5 4.5 0.2 max - 0.005 0.025 0.05 2.0-3.0 0.16

Mechanical Properties

Alloy Tensile strength Yield strength Elongation in 2 in. or 50 mm, min,
%A
Bend test radiusB
min, ksi [MPa] max, ksi [MPa] min, ksi [MPa] max, ksi [MPa]
UNS R60700 - 55 [380] - 44 [305] 20 5T
UNS R60702 55 [380] - 30 [205] - 16 5T
UNS R60704 60 [415] - 35 [240] - 14 5T
UNS R60705 80 [550] - 55 [380] - 16 3T
UNS R60706 74 [510] - 50 [345] - 14 2.5T
Note A: When a sub-size specimen is used, the gage length shall be as specified in Test Methods E 8 for that specimen.
Note B: T equals the thickness of the bend test specimen. Bend tests are not applicable to material over 0.187 in. [4.8 mm] in thickness.

Products