ASTM A517 / A517M Grade H

Chemical Properties

Carbon Manganese Phosphorus,maxA Sulfur,maxA Silicon Chromium Molybdenum Boron Vanadium Titanium
0.13–0.23 0.64–1.10 0.025 0.025 0.13–0.37 0.36–0.69 0.12–0.28 0.0005–0.005 0.02–0.09 0.01–0.05
Note: A Applied to both heat and product analyses.
C Zirconium may be replaced by cerium. When cerium is added, the cerium/sulfur ratio should be approximately 1.5 to 1, based on heat analysis.

Mechanical Properties

Sizes Tensile strength,min:
ksi [MPa]
Yield strength,min:
ksi [MPa]
Elongation in 2 in. [50 mm] min, %A Reduction of area, min, %
Rectangular specimens Round specimens
2.50 in. [65 mm] and Under 115–135 [795–930] 100 [690] 16 35 45
Over 2.50 to 6 in. [65 to 150 mm] 105–135 [725 to 930] 90 [620] 14 - 45

Products