ASTM A353 / A353M

This specification covers double-normalized and tempered 9 % nickel steel plates intended particularly for welded pressure vessels for cryogenic service.Plates produced under this specification are subject to impact testing at −320°F [−195°C] or at such other temperatures as are agreed upon.The maximum thickness of plates is limited only by the capacity of the material to meet the specific mechanical property requirements; however, current mill practice normally limits this material to 2 in. [50 mm] max.This material is susceptible to magnetization. Use of magnets in handling after heat treatment should be avoided if residual magnetism would be detrimental to subsequent fabrication or service.

Chemical Properties

Carbon Manganese Phosphorus Sulfur Silicon Nickel
0.13 maxA 0.98 0.015 maxA 0.015 maxA 0.13–0.45B 8.40–9.60

Note: A Applies to both heat and product analyses.

Note: B The specified minimum limit does not apply if the total aluminum content is 0.030 % or more, or provided that acid soluble aluminum is 0.025 % or more.

Mechanical Properties

Tensile strength,min:
ksi [MPa]
Yield strength (0.2 % offset), min, ksi [MPa]A Elongation in 2 in. [50 mm] min, %B
100–120 [690–825] 75 [515] 20.0

Products