ASTM A1053 / A1053M
This specification covers seam welded ferriticmartensitic (dual
phase) stainless steel pipe intended for abrasive and general
corrosion service, manufactured with or without the addition of
filler metal. Nominal sizes are NPS 2 to NPS 36 inclusive, with
nominal (average) wall thickness up to 0.75-in. (19 mm). The values
stated in either inch-pound units or SI units are to be regarded
separately as standard. Within the text, the SI units are shown in
brackets. The values stated in each system may not be exact
equivalents. Therefore, each system shall be used independently of
the other. Combining values from the two systems may result in
non-conformance with the standard. The inch-pound units shall apply
unless the “M” designation is specified in the order.
Chemical Properties
| UNS DesignationB |
Carbon |
Manganese |
Phosphorus |
Sulfur |
Silicon |
Chromium |
Nickel |
Nitrogen |
Other Elements |
| S41003 |
0.030 |
1.50 |
0.040 |
0.030 |
1.00 |
10.5-12.5 |
1.50 |
0.030 |
- |
Note B: Designation established in accordance with Practice E527 and SAE J
1086.
Mechanical Properties
| Grade |
Yield Strength,min,ksi [Mpa] |
Tensile Strength,min,ksi [Mpa] |
Elongation in 2 in. [50 mm],min,% |
Brinell Hardness,max |
| 50 |
50 [350] |
70 [485] |
18 |
360 |
Products
