ASTM A743 / A743M UNS J92604

Chemical Properties

Carbon, max Manganese, max Silicon Phosphorus, max Sulfur, max Chromium Nickel Molybdenum Columbium Copper Nitrogen
Note C: UNS J92604 shall have a columbium content of not less than eight times the carbon, but not over 1.00 %.

Mechanical Properties

Tensile strength,
ksi [MPa] 		Yield strength,
min, ksi [MPa] 		Elongation in 2 in.
[50 mm], min, %A 		Reduction of area,
min, %
Note A: When ICI test bars are used in tensile testing as provided for in this specification, the gage length to reduced section diameter ratio shall be 4:1.

Products