ASTM A352 / A352M UNS J42215

Chemical Properties

UNS Number Carbon Silicon Manganese Phosphorus Sulfur Nickel Chromium Molybdenum

Mechanical Properties

UNS Number Tensile strength,
ksi [MPa] 		Yield strength,C
min, ksi [MPa] 		Elongation in 2 in.
[50 mm], min, %D 		Reduction of area, min, %
Note C: Determine by either 0.2 % offset method or 0.5 % extension-under-load method.
Note D: When ICI test bars are used in tensile testing as provided for in Specification A703/A703M, the gage length to reduced section diameter ratio shall be 4 to 1.

Products