ASTM A352 / A352M Grade LCB

Chemical Properties

Grade Carbon Silicon Manganese Phosphorus Sulfur Nickel Chromium Molybdenum Copper Vanadium
Note A: Specified Residual Elements—The total content of these elements is 1.00 % maximum.

Mechanical Properties

Grade Tensile strength,
ksi [MPa] 		Yield strength,C
min, ksi [MPa] 		Elongation in 2 in.
[50 mm], min, %D 		Reduction of area, min, %
Note C: Determine by either 0.2 % offset method or 0.5 % extension-under-load method.
Note D: When ICI test bars are used in tensile testing as provided for in Specification A703/A703M, the gage length to reduced section diameter ratio shall be 4 to 1.

Products