This specification establishes the requirements for copper-nickel-zinc and copper-nickel rod and bar for general application produced from Copper Alloy UNS Nos. C70600, C70620, C71500, C71520, C74500, C75200, C75700, C76400, C77000, and C79200.The values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
| Copper Alloy UNS No. | Copper | Nickel | Lead | Iron | Manganese | Zinc | Phosphorus | Sulfur | Carbon |
|---|---|---|---|---|---|---|---|---|---|
| C70600 | remainder | 9.0 - 11.0 | 0.05 | 1.0 - 1.8 | 1.0 | 1.0 | 0.02 | 0.02 | - |
| C70620 | 86.5 min | 9.0 - 11.0 | 0.02 | 1.0 - 1.8 | 1.0 | 0.50 | 0.02 | 0.02 | 0.5 |
| C71500 | remainder | 29.0 - 33.0 | 0.05 | 0.40 - 1.0 | 1.0 | 1.0 | - | - | - |
| C71520 | 65.0 | 29.0 - 33.0 | 0.02 | 0.40 - 1.0 | 1.0 | 0.50 | 0.02 | 0.02 | 0.05 |
| C74500 | 63.5 - 66.5 | 9.0 - 11.0 | 0.05 | 0.25 | 0.50 | remainder | - | - | - |
| C75200 | 63.5 - 66.5 | 16.5 - 19.5 | 0.05 | 0.25 | 0.50 | remainder | - | - | - |
| C74700 | 63.5 - 66.5 | 11.0 - 13.0 | 0.05 | 0.25 | 0.50 | remainder | - | - | - |
| C76400 | 58.5 - 61.5 | 16.5 - 19.5 | 0.05 | 0.25 | 0.50 | remainder | - | - | - |
| C77000 | 53.5 - 56.5 | 16.5 - 19.5 | 0.05 | 0.25 | 0.50 | remainder | - | - | - |
| C79200 | 59.0 - 66.5 | 11.0 - 13.0 | 0.8 - 1.4 | 0.25 | 0.50 | remainder | - | - | - |