ASTM A276 / A276M UNS 32550
ASTM A276 UNS S20910 is a material grade specification for cold-finished or hot-finished bars in S20910 stainless steel, available in form of rounds, square, hexagons and other hot rolled extruded shapes. Ferrobend uses S20910 bar stock to ASTM A276 specifications for manufacturing stainless steel S20910 bolts, nuts, screws, studs, threaded rods, other fasteners and bar stock components for general engineering purposes.
ASTM A276 specification covers requirements such as chemical composition, mechanical properties, heat treatment and other supplementary requirements for S20910 stainless steel round bars, square bars, hexagon bars and other extruded shapes.
Chemical Composition
| Identification Symbol | UNS Number | Elements | Composition % |
|---|---|---|---|
| XM - 19 | S20910 | Carbon | 0.06 max |
| Manganese | 4.00 - 6.00 | ||
| Phosphorus | 0.045 max | ||
| Sulfur | 0.030 max | ||
| Silicon | 1.00 max | ||
| Chromium | 20.5 - 23.5 | ||
| Nickel | 11.5 - 13.5 | ||
| Molybdenum | 1.50 - 3.00 | ||
| Nitrogen | 0.20 - 0.40 | ||
| Columbium | 0.10 - 0.30 | ||
| Vanadium | 0.10 - 0.30 |
Mechanical Properties
| Property | Value | |||
|---|---|---|---|---|
| Diameter or Thickness, in. (mm) | All | up to 2 (50.8), incl |
over 2 to 3 (50.8 to 76.2), incl |
over 3 to 8 (76.2 to 203.2), incl |
| Finish | Hot-Finished & Cold Finished | Hot-Finished & Cold Finished | ||
| Tensile Strength, min, ksi [MPa] | 100 [690] | 135 [930] | 115 [795] | 100 [690] |
| Yield Strength, min, ksi [MPa] | 55 [380] | 105 [725] | 75 [515] | 60 [415] |
| Elongation in 2 in. [50mm] or 4D, min, % | 35 | 20 | 25 | 30 |
| Reduction or Area, min, % | 55 | 50 | 50 | 50 |
| Brinell Hardness Number, HBW | -- | -- | -- | -- |
