ASTM A276 / A276M Type 316N
ASTM A276 Type 316N is a material grade specification for cold-finished or hot-finished bars in 316N stainless steel, available in form of rounds, square, hexagons and other hot rolled extruded shapes. Ferrobend offers 316N bars, shafts, angle, channel, beam profiles, bolts, studs, screws, nuts, threaded rods, pins and other bar stock components to astm a276 type 316N specification.
ASTM A276 specification covers requirements such as chemical composition, mechanical properties, heat treatment and other supplementary requirements for 316N stainless steel round bars, square bars, hexagon bars and other extruded shapes.
Chemical Composition
| Grade Symbol | UNS Number | Elements | Composition, % |
|---|---|---|---|
| Type 316N | S31651 | Carbon | 0.08 max |
| Manganese | 2.00 max | ||
| Phosphorus | 0.045 max | ||
| Sulfur | 0.030 max | ||
| Silicon | 1.00 max | ||
| Chromium | 16.00 - 18.00 | ||
| Nickel | 10.00 - 14.00 | ||
| Molybdenum | 2.00 - 3.00 | ||
| Nitrogen | 0.10 - 0.16 |
Mechanical Properties
| Property | Value |
|---|---|
| Condition | A |
| Finish | Hot-Finished & Cold Finished |
| Tensile Strength, min, ksi [MPa] | 80 [550] |
| Yield Strength, min, ksi [MPa] | 35 [240] |
| Elongation in 2 in. [50mm] or 4D, min, % | 30 |
| Reduction or Area, min, % | -- |
| Brinell Hardness Number, HBW | -- |
Mechanical Properties
| Property | Value | ||||
|---|---|---|---|---|---|
| Condition | B | ||||
| Finish | Cold Finished | ||||
|
Diameter or Thickness, in. (mm) |
up to 3⁄4 (19.05) incl |
over 3⁄4 (19.05) to 1 (25.40) |
over 1 (25.40) to 11⁄4 (31.75) |
over 11⁄4 (31.75) to 11⁄2 (38.10) |
over 11⁄2 (38.10) to 13⁄4 (44.45) |
| Tensile Strength, min, ksi [MPa] | 125 [860] | 115 [795] | 105 [725] | 100 [690] | 95 [655] |
| Yield Strength, min, ksi [MPa] | 100 [690] | 80 [550] | 65 [450] | 50 [345] | 45 [310] |
| Elongation in 2 in. [50mm] or 4D, min, % | 12 | 15 | 20 | 24 | 28 |
| Reduction or Area, min, % | 35 | 35 | 35 | 45 | 45 |
| Brinell Hardness Number, HBW | -- | -- | -- | -- | -- |
Mechanical Properties
| Property | Value | ||
|---|---|---|---|
| Condition | S | ||
| Finish | Cold Finished | ||
| Diameter or Thickness,in. (mm) | up to 2 (50.8) incl |
over 2 to 21⁄2 (50.8 to 63.5) incl |
over 21⁄2 to 3 (63.5 to 76.2) incl |
| Tensile Strength, min, ksi [MPa] | 95 [650] | 90 [620] | 80 [550] |
| Yield Strength, min, ksi [MPa] | 75 [515] | 65 [450] | 55 [380] |
| Elongation in 2 in. [50mm] or 4D, min, % | 25 | 30 | 30 |
| Reduction or Area, min, % | 40 | 40 | 40 |
| Brinell Hardness Number, HBW | -- | -- | -- |
