ASTM A276 / A276M Type 304LN
ASTM A276 Type 304LN is a material grade specification for cold-finished or hot-finished bars in 304LN stainless steel, available in form of rounds, square, hexagons and other hot rolled extruded shapes. Ferrobend offers 304LN bars, shafts, angle, channel, beam profiles, bolts, studs, screws, nuts, threaded rods, pins and other bar stock components to astm a276 type 304LN specification.
ASTM A276 specification covers requirements such as chemical composition, mechanical properties, heat treatment and other supplementary requirements for 304LN stainless steel round bars, square bars, hexagon bars and other extruded shapes.
Chemical Composition
| Grade Symbol | UNS Number | Elements | Composition, % |
|---|---|---|---|
| Type 304LN | S30453 | Carbon | 0.030 max |
| Manganese | 2.00 max | ||
| Phosphorus | 0.045 max | ||
| Sulfur | 0.030 max | ||
| Silicon | 1.00 max | ||
| Chromium | 18.00 - 20.00 | ||
| Nickel | 8.00 - 11.00 | ||
| Nitrogen | 0.10 - 0.16 |
Mechanical Properties
| Property | Value | ||
|---|---|---|---|
| Finish | Hot-Finished | Cold Finished | |
| Diameter or Thickness,in. (mm) | All | up to 1⁄2 (12.70) incl | over 1⁄2 (12.70) |
| Tensile Strength, min, ksi [MPa] | 75 [515] | 90 [620] | 75 [515] |
| Yield Strength, min, ksi [MPa] | 30 [205] | 45 [310] | 30 [205] |
| Elongation in 2 in. [50mm] or 4D, min, % | 40 | 30 | 30 |
| Reduction or Area, min, % | 50 | 40 | 40 |
| Brinell Hardness Number, HBW | -- | -- | -- |
