ASTM A193 Grade B8MLN Specification for high tensile bolts, screws, stud bolts, anchor bolts, threaded rods and other threaded fasteners, made from 316LN / UNS S31653 stainless steel.

ASTM A193 Grade B8MLN is a standard material specification for corrosion resistant 316LN fasteners such as bolts, screws, studs, threaded rods and other externally threaded parts, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B8MLN is a carbide solution treated 316LN stainless steel material having classified under tensile class 1 & 1D with minimum tensile requirement of 75 ksi, yield 30 ksi and maximum hardness limit of 223 HBW or 96 HRB. This specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B8MLN Fasteners.

Chemical Composition

Element	Austenitic Stainless Steel
	UNS S31653 / AISI 316LN / 1.4429
	CompositionA, %
Carbon	0.03 max
Manganese	2.00
Phosphorus	0.045 max
Sulfur	0.030 max
Silicon	1.00 max
Chromium	16.00 - 18.00
Nickel	10.00 - 13.00
Molybdenum	2.00 - 3.00
Nitrogen	0.10 - 0.16

A: The intentional addition of Bi, Se, Te, and Pb is not permitted.

Mechanical Properties

Tensile Class	Diameter, Inch	Tensile Strength, min, ksi	Yield Strength, min, 0.2% offset, ksi	Elongation in 4D, min, %	Reduction of Area, min, %	Hardness, max
								Class 1 & 1D	All Sizes	75	30	30	50	192 HBW or 90 HRB

Heat Treatment: Carbide Solution Treated in finished condition.