ASTM A193 Grade B8MLCuN Class 1D Specification for high tensile bolts, screws, stud bolts, anchor bolts, threaded rods and other threaded fasteners, made from UNS S31254 / Alloy 254SMO stainless steel.

ASTM A193 Grade B8MLCuN Class 1D is a standard material specification for corrosion resistant & high strength Alloy 254 / UNS S31254 fasteners such as bolts, screws, studs, threaded rods and other externally threaded parts, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B8MLCuN Class 1B and 1D is a carbide solution treated 6% moly stainless steel having a minimum tensile requirement of 80 ksi, yield 30 ksi and maximum hardness limit of 223 HBW or 96 HRB. This specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B8MLCuN Class 1B and 1D Fasteners.

Chemical Composition

Element	Austenitic Stainless Steel
	UNS S31254 / Alloy 254SMO / 1.4547
	CompositionA, %
Carbon	0.02 max
Manganese	1.00
Phosphorus	0.030 max
Sulfur	0.010 max
Silicon	0.80 max
Chromium	19.50 - 20.50
Nickel	17.50 - 18.50
Molybdenum	6.00 - 6.50
Nitrogen	0.18 - 0.22
Copper	0.50 - 1.00

^AThe intentional addition of Bi, Se, Te, and Pb is not permitted.

Mechanical Properties

Tensile Class	Diameter, Inch	Tensile Strength, min, ksi	Yield Strength, min, 0.2% offset, ksi	Elongation in 4D, min, %	Reduction of Area, min, %	Hardness, max
								Class 1D	All Sizes	80	35	30	40	223 HBW or 96 HRB

Heat Treatment: Carbide Solution Treated.