ASTM A193 Grade B8 Class 1 Specification
ASTM A193 Grade B8 Class 1 Specification for high tensile bolts, screws, stud bolts, anchor bolts, threaded rods and other fasteners, made from carbide solution treated 304 stainless steel.
ASTM A193 Grade B8 Class 1 is a standard material specification for corrosion resistant austenitic stainless steel fasteners, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B8 Class 1 is a carbide-solution-treated 304 stainless steel with minimum tensile requirement of 75 ksi, yield 30 ksi and maximum hardness of 96 HRB. This specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B8 Class 1 Fasteners.
Chemical Composition
| Element | Austenitic Stainless Steel |
|---|---|
| AISI 304 / 304L | |
| CompositionA, % | |
| Carbon | 0.08 max |
| Manganese | 2.00 |
| Phosphorus | 0.045 max |
| Sulfur | 0.030 max |
| Silicon | 1.00 max |
| Chromium | 18.00 - 20.00 |
| Nickel | 8.00 - 11.00 |
AThe intentional addition of Bi, Se, Te, and Pb is not permitted.
Mechanical Properties
| Tensile Class | Diameter, Inch |
Tensile Strength, min, ksi |
Yield Strength, min, 0.2% offset, ksi |
Elongation in 4D, min, % |
Reduction of Area, min, % |
Hardness, max |
|
|---|---|---|---|---|---|---|---|
| Class 1 | All Sizes | 75 | 30 | 30 | 50 | 223 HBW or 96 HRB | |
Heat Treatment: Carbide Solution Treated
